Exploring Social Marketing Strategies in Addressing Fetal Alcohol Spect

There are various health disorders, and diseases that can be either preventable or non-preventable within communities. One disorder that can potentially be preventable is Fetal Alcohol Spectrum Disorder (FASD) (Idrus & Thomas, 2011). FASD is an, â€Å"umbrella term that encompasses the following disorders: Fetal Alcohol Syndrome, partial Fetal Alcohol Syndrome, Alcohol Related Neurological Disorder, and Alcohol Related Brain Disorder† (Saskatchewan Prevention Institute (SPI), 2009, p. 4). For the purpose of this paper the writer will use the umbrella term, FASD. FASD is caused by the consumption of alcohol during pregnancy (SPI, 2009). Approximately 9.1 out of 1000 births have FASD in Canada (SPI, 2009). Therefore, presenting as a significant problem that affects many communities. Health ramifications of a person with FASD are life long. FASD effect’s all the determinants of health (DOH) in some form. A newspaper article was the underlying motive for the topic FASD and can be viewed in the Appendix. This paper will explore three DOH: social environment, income and social status, and healthy child development with relation to the impact on FASD. Subsequently suggesting proposed strategies in addressing FASD to improve population health. Determinants of Health Social Environment Social environment refers to the resources and support found in communities that help people improve or avoid health risks (Stanhope, Lancaster, Jessup-Falcioni, & Viverais-Dresler, 2008). Some females may participate in environments where social or binge drinking occurs often, such as going for a few drinks after work, the female maybe unaware of the effects of minimal alcohol on the fetus (SPI, 2009). Another example of the effect of the social... ...owledge and awareness of FASD in the general public (Riley et al., 2010). The negative aspect of these campaigns is the lack of behavioural change that was evaluated (Riley et al., 2010). As the goal of all of these campaigns was to decrease or cease alcohol consumption in pregnant women, this is an important implication (Riley et al., 2010). FASD is a disorder that can be potentially preventable in collaboration with a community. The social environment, income and social status, and healthy child development all influence FASD. Both social marketing and primary prevention strategies are effective and should be utilized to raise awareness and decrease/cease FASD in newborns. By incorporating proper messaging themes and collaborating techniques for the awareness campaigns shown, will help improve not only FASD, but also the health of the entire population.

Pride in Homers Iliad :: Iliad essays

Pride in The Iliad      Ã‚  Ã‚  Ã‚  Ã‚   The period in which the events in The Iliad took place were different than the times of today. Back then, the most important aspect of life for a person was to be a hero and to be   remembered.   One's pride would come before everything else. In the present day, this concept would be thought of as illogical or foolish. This is certainly true. But, that is how life was in that time- peoples' beliefs were to be the death of them. Pride was the downfall of all characters in Homer's epic poem, The Iliad.      Ã‚  Ã‚  Ã‚  Ã‚   Hectors fatal mistake was that he chose pride over his own well being in the battle with Achilles. He could have taken safety within the walls of Troy, or disappeared into a mass of his comrades, but Hector chose to stand his ground and confront Achilles.  Ã‚   "Ah for a young man all looks fine and noble if he goes down in war...he lies there dead...but whatever death lays bare, all wounds are marks of glory."   If   Hector had salvaged his pride and retreated to safety, he would have lived to defend Troy. Therefore, the possibility arises that he could have stopped the onslaught of the Acheans altogether, and won the war for the Trojans. The result of Hectors pride was his death and the betrayment of his fellow warriors and friends.      Ã‚  Ã‚  Ã‚  Ã‚   Another person within the Iliad whose pride was the downfall of his character, was Patrocleus. Patrocleus was a great warrior, friend, and asset to the Achiens. But, he made foolish choices on account of his pride. For instance he chose to wear Achille's armor into battle when Achilles refused to fight. This was only for his self-glorification. "...Once you have beaten off the lethal fire, quick, come back to the ships-you must not battle Hector!"   After going into battle brandishing the armor, Patrocleus becomes overzealous and places himself at the enemy's disposal. If Patrocleus would have thought logically, and not acted on pride, he would of remained alive.      Ã‚  Ã‚  Ã‚  Ã‚   In addition to Hector and Patrocleus, the main character in The Iliad - Achilles, was also brought to ruin by his pride.   For example, he was too proud to fight in the war when Agamemnon took his woman.

The Consequences of Drinking And Driving Essay -- Alcohol, drunk drivi

Driving under the influence has affected many people's lives and families. Today I would like to talk to you about the problems of drinking and driving, and why it is a concern for all of us. Driving under the influence is one of the most common and dangerous situations you can put yourself or someone else in. The fact is that drinking and driving is a huge deal and can leave a long trail of broken dreams and hearts. If you drink and drive, not only are you putting yourself at risk, but your passengers and the pedestrians outside of your vehicle. According to the most recent statistics by the National Commission Against Drunk Driving states that 17,000 Americans die each year in alcohol- related traffic crashes and 600,000 Americans are injured (NCADD). That's is and average of one fatal accident every thirty minutes. Every thirty minutes someone's life has ended and his or her family and friends left to weep. Anyone of these accidents could easily be a family member, relati ve, or neighbor. Most of these alcohol-related crashes are not just cuts and bruises. People are paralyzed, severely disfigured, or have lost the ability to live out a normal life with work and having fun are now activities that now rely on the aid of others. There is plenty of reasons alcohol and driving does not mix. The body is a very complicated organism with everything needing to go just right for it to function properly. Alcohol only affects how your body functions negatively. Alcohol is a downer that reduces activity in the central nervous system. The person exhibits loss muscle tone, loss of fine motor coordination ( Net Biz Mentor). Depression and alcohol also do not mix. When people get depressed from everyday life they have the ten... ...up in jail because they are one tenth of a point over the legal limit. So try to manage your life, by not drinking and driving. If you do go out for a drink, try to go somewhere that you can reach either on foot or by public transportation. Think about sharing the driving and on different days with a group of people so that you can take turns at driving. If you do drink even though you meant not to, and you went out with your vehicle, consider taking a taxi and leaving your vehicle behind. This is a whole lot better than living with the guilt and shame of having killed a person or even a friend. Do you really want to be known as the person who has killed someone because of your stupidity? Work Cited -Mothers Against Drunk Drivers. Drinking Driving and Other Drugs. Homepage. 20 June 2003.

Electronics and Communication Engineering (Ece) Syllabus Book R07

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD B. TECH. ELECTRONICS AND COMMUNICATION ENGINEERING I YEAR COURSE STRUCTURE Code Subject English Mathematics – I Mathematical Methods Applied Physics C Programming and Data Structures Network Analysis Electronic Devices and Circuits Engineering Drawing Computer Programming Lab. IT Workshop Electronic Devices and Circuits Lab English Language Communication Skills Lab. Total T 2+1 3+1 3+1 2+1 3+1 2+1 3+1 25 P/D 3 3 3 3 3 15 C 4 6 6 4 6 4 6 4 4 4 4 4 56JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD. B. TECH. ELECTRONICS AND COMMUNICATION ENGINEERING II Year COURSE STRUCTURE Code Subject Mathematics – III Probability Theory and Stochastic Processes Environmental Studies Signals and Systems Electrical Technology Electronic Circuit Analysis Electronic Circuits Lab. Electrical Technology Lab. II YEAR II Semester Code Subject Pulse and Digital Circuits Control Systems Object Oriented Programming Switching Theory and Logic Design EM Waves and Transmission Lines Analog Communications Analog Communications Lab.Pulse and Digital Circuits Lab. T 4+1* 4+1* 4+1* 4+1* 4+1* 4+1* 30 P 3 3 6 C 4 4 4 4 4 4 2 2 28 T 4+1* 4+1* 4+1* 4+1* 4+1* 4+1* 30 P 3 3 6 C 4 4 4 4 4 4 2 2 28 I Semester JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD. B. TECH. ELECTRONICS AND COMMUNICATION ENGINEERING III Year COURSE STRUCTURE Code Subject Managerial Economics and Financial Analysis Computer Organization Linear IC Applications Digital IC Applications Antennas and Wave Propagation Digital Communications Digital Communications Lab.IC Applications and ECAD Lab. T 4+1* 4+1* 4+1* 4+1* 4+1* 4+1* 30 P 3 3 6 C 4 4 4 4 4 4 2 2 28 II Semester Subject Management Science Telecommunication Switching Systems Digital Signal Processing VLSI Design Microwave Engineering Microprocessors and Interfacing Electronic Computer Aided Design Lab. Advanced English Communication Skills Lab T 4+1* 4+1* 4+1* 4+1* 4+1* 4+1* 30 P 3 3 6 C 4 4 4 4 4 4 2 2 28 I Semester III YEAR CodeJAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD. B. TECH. ELECTRONICS AND COMMUNICATION ENGINEERING IV Year COURSE STRUCTURE Code Subject Computer Networks Electronic Measurements & Instrumentation Cellular and Mobile Communications Radar Systems Elective-I Micro Controllers and Applications Television Engineering Operating Systems Elective-II Digital Image Processing Satellite Communications Data Base Management Systems Microwave and Optical Communications Lab.Digital Signal Processing Lab IV Year COURSE STRUCTURE Code Subject Optical Communications Elective-III Embedded and Real Time Systems Bio-Medical Instrumentation Digital Design Through Verilog Elective-IV Wireless Communications and Networks DSP Processors and Architectures Artificial Neural Networks Industry Oriented Mini Project Seminar Project Work Comprehensive Viva T 4+1* 4+1* P C 4 4 T 4+1* 4+1* 4+1* 4+1* 4+1* P C 4 4 4 4 4 I Semester 4+1* – 4 30 3 3 6 2 2 28 II Semester 4+1* †“ 4 15 – 2 2 10 2 28 Note :All End Examinations (Theory and Practical) are of three hours duration. * – Tutorial T – Theory P – Practical C – Credits D – Drawing I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 2+1* ENGLISH P 0 C 4 1. INTRODUCTION : In view of the growing importance of English as a tool for global communication and the consequent emphasis on training students to acquire communicative competence, the syllabus has been designed to develop linguistic and communicative competence of Engineering students.The prescribed books and the exercises are meant to serve broadly as students’ handbooks. In the English classes, the focus should be on the skills of reading, writing, listening and speaking and for this the teachers should use the text prescribed for detailed study. For example, the students should be encouraged to read the texts/selected paragraphs silently. The teachers can ask comprehension questions to stimulate discussion and based on the discussions students can be made to write short paragraphs/essays etc.The text for non-detailed study is for extensive reading/reading for pleasure by the students. Hence, it is suggested that they read it on their own with topics selected for discussion in the class. The time should be utilized for working out the exercises given after each section , as also for supplementing the exercises with authentic materials of a similar kind for example, from newspaper articles, advertisements, promotional material etc.. However, the stress in this syllabus is on skill development and practice of language skills. 2.OBJECTIVES: a. To improve the language proficiency of the students in English with emphasis on LSRW skills. b. To equip the students to study academic subjects with greater facility through the theoretical and practical components of the English syllabus. c. To develop the study skills and communication skills in formal and inform al situations. 3. SYLLABUS : Listening Skills: Objectives 1. To enable students to develop their listening skill so that they may appreciate its role in the LSRW skills approach to language and improve their pronunciation 2.To equip students with necessary training in listening so that can comprehend the speech of people of different backgrounds and regions Students should be given practice in listening to the sounds of the language to be able to recognise them, to distinguish between them to mark stress and recognise and use the right intonation in sentences. †¢ Listening for general content †¢ Listening to fill up information †¢ Intensive listening †¢ Listening for specific information Speaking Skills : Objectives 1. To make students aware of the role of speaking in English and its contribution to their success. 2.To enable students to express themselves fluently and appropriately in social and professional contexts. †¢ Oral practice †¢ Describing obj ects/situations/people †¢ Role play – Individual/Group activities (Using exercises from all the nine units of the prescribed text: Learning English : A Communicative Approach. ) †¢ Just A Minute(JAM) Sessions. Reading Skills: Objectives 1. To develop an awareness in the students about the significance of silent reading and comprehension. 2. To develop the ability of students to guess the meanings of words from context and grasp the overall message of the text, draw inferences etc. Skimming the text †¢ Understanding the gist of an argument †¢ Identifying the topic sentence †¢ Inferring lexical and contextual meaning †¢ Understanding discourse features †¢ Recognizing coherence/sequencing of sentences NOTE : The students will be trained in reading skills using the prescribed text for detailed study. They will be examined in reading and answering questions using ‘unseen’ passages which may be taken from the non-detailed text or othe r authentic texts, such as magazines/newspaper articles. Writing Skills : Objectives 1. To develop an awareness in the students about writing as an exact and formal skill 2.To equip them with the components of different forms of writing, beginning with the lower order ones. †¢ Writing sentences †¢ Use of appropriate vocabulary †¢ Paragraph writing †¢ Coherence and cohesiveness †¢ Narration / description †¢ Note Making †¢ Formal and informal letter writing †¢ Editing a passage 4. TEXTBOOKS PRESCRIBED: In order to improve the proficiency of the student in the acquisition of the four skills mentioned above, the following texts and course content, divided into Eight Units, are prescribed: For Detailed study 1. LEARNING ENGLISH: A Communicative Approach, Hyderabad: Orient Longman, 2006. Six Selected Lessons) For Non-detailed study 2. WINGS OF FIRE: An Autobiography – APJ Abdul Kalam, Abridged version with Exercises, Universities Press (India ) Pvt. Ltd. , 2004. A. STUDY MATERIAL: Unit –I 1. Astronomy from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005. 2. Unit –II Chapters 1-4 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises, Universities Press (India) Pvt. Ltd. ,2004 Information Technology from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005.Chapters 5-8 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises, Universities Press (India) Pvt. Ltd. ,2004 Humour from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005. Chapters 9-12 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises. , Universities Press (India) Pvt. Ltd. ,2004 Environment from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005. Chapters 13-16 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises, Univ ersities Press (India) Pvt. Ltd. ,2004 3. 4.Unit –III 5. 6. Unit –IV 7. 8. Unit –V 9. Inspiration from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005. 10. Chapters 17-20 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises, Universities Press (India) Pvt. Ltd. ,2004. Unit – VI 11. Human Interest from LEARNING ENGLISH: A Communicative Approach, Orient Longman, 2005. 12. Chapters 21-24 from Wings of Fire: An Autobiography – APJ Abdul Kalam, an abridged version with Exercises, Universities Press (India) Pvt. Ltd. , 2004. * Exercises from the lessons not prescribed shall also be used for classroom tasks.Unit – VII Exercises on Reading and Writing Skills Reading Comprehension Situational dialogues Letter writing Essay writing Unit – VIII Practice Exercises on Remedial Grammar covering Common errors in English, Subject-Verb agreement, Use of Articles and Prepositions, Tense and aspect Vocabulary development covering Synonyms & Antonyms, one-word substitutes, prefixes & suffixes, Idioms & phrases, words often confused. REFERENCES : 1. Strengthen Your English, Bhaskaran & Horsburgh, Oxford University Press 2. 3. 4. 5. 6. 7. 8. 9. 10. Basic Communication Skills for Technology, Andrea J Rutherfoord, Pearson Education Asia.Murphy’s English Grammar with CD, Murphy, Cambridge University Press English Skills for Technical Students by Orient Longman Everyday Dialogues in English by Robert J. Dixson, Prentice-Hall of India Ltd. , 2006. English For Technical Communication, Vol. 1 & 2, by K. R. Lakshmi Narayanan, Sci tech. Publications. A Hand book of English for Engineers & Technologists by Dr. P. Eliah, B. S. Publications. Developing Communication Skills by Krishna Mohan & Meera Benerji (Macmillan) Speaking and Writing for Effective Business Communication, Francis Soundararaj, MacMillan India Ltd. , 2007.The Oxford Guide to Writing and Speaking, John Seely, O xford I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 3+1* MATHEMATICS – I P 0 C 6 UNIT – I Differential equations of first order and first degree – exact, linear and Bernoulli. Applications to Newton’s Law of cooling, Law of natural growth and decay, orthogonal trajectories. UNIT – II Non-homogeneous linear differential equations of second and higher order with constant coefficients with RHS term of the type e ax , Sin ax, cos ax, polynomials in x, e ax V(x), xV(x), method of variation of parameters.UNIT – III Rolle’s Theorem – Lagrange’s Mean Value Theorem – Cauchy’s mean value Theorem – Generalized Mean Value theorem (all theorems without proof) Functions of several variables – Functional dependenceJacobian- Maxima and Minima of functions of two variables with constraints and without constraints UNIT – IV Radius, Centre and Circle of Curvature – Evolu tes and Envelopes Curve tracing – Cartesian , polar and Parametric curves. UNIT – V Applications of integration to lengths, volumes and surface areas in Cartesian and polar coordinates multiple integrals – double and triple integrals – change of variables – change of order of integration.UNIT – VI Sequences – series – Convergences and divergence – Ratio test – Comparison test – Integral test – Cauchy’s root test – Raabe’s test – Absolute and conditional convergence UNIT – VII Vector Calculus: Gradient- Divergence- Curl and their related properties of sums- products- Laplacian and second order operators. Vector Integration – Line integral – work done – Potential function – area- surface and volume integrals Vector integral theorems: Green’s theorem-Stoke’s and Gauss’s Divergence Theorem (With out proof). Verification o f Green’s – Stoke’s and Gauss’s Theorems.UNIT – VIII Laplace transform of standard functions – Inverse transform – first shifting Theorem, Transforms of derivatives and integrals – Unit step function – second shifting theorem – Dirac’s delta function – Convolution theorem – Periodic function – Differentiation and integration of transforms-Application of Laplace transforms to ordinary differential equations Partial fractions-Heaviside’s Partial fraction expansion theorem. Text Books: 1. A text Book of Engineering Mathematics, Vol-1 T. K. V. Iyengar, B. Krishna Gandhi and Others, S. Chand & Company. 2.A text Book of Engineering Mathematics, C. Sankaraiah, V. G. S. Book Links. 3. A text Book of Engineering Mathematics, Shahnaz Bathul, Right Publishers. 4. A text Book of Engineering Mathematics, P. Nageshwara Rao, Y. Narasimhulu & N. Prabhakar Rao, Deepthi Publications. References: 1 . A text Book of Engineering Mathematics, B. V. Raman, Tata Mc Graw Hill. 2. Advanced Engineering Mathematics, Irvin Kreyszig, Wiley India Pvt. Ltd. 3. A text Book of Engineering Mathematics, Thamson Book Collection. I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 3+1*P 0 C 6 MATHEMATICAL METHODS UNIT – I Matrices and Linear systems of equations: Elementary row transformations-Rank-Echelon form, Normal form – Solution of Linear Systems – Direct Methods- LU Decomposition- LU Decomposition from Gauss Elimination –Solution of Tridiagonal Systems-Solution of Linear Systems UNIT – II Eigen values, eigen vectors – properties – Cayley-Hamilton Theorem – Inverse and powers of a matrix by Cayley-Hamilton theorem – Diagonolization of matrix. Calculation of powers of matrix – Modal and spectral matrices.UNIT – III Real matrices – Symmetric, skew – symmetric, orthogonal, Linear T ransformation – Orthogonal Transformation. Complex matrices: Hermitian, Skew-Hermitian and Unitary – Eigen values and eigen vectors of complex matrices and their properties. Quadratic forms- Reduction of quadratic form to canonical form – Rank – Positive, negative definite – semi definite – index – signature – Sylvester law. UNIT – IV . Solution of Algebraic and Transcendental Equations: Introduction – The Bisection Method – The Method of False Position – The Iteration Method – Newton-Raphson Method.Interpolation: Introduction- Errors in Polynomial Interpolation – Finite differences- Forward DifferencesBackward differences –Central differences – Symbolic relations and separation of symbols-Differences of a polynomial-Newton’s formulae for interpolation – Central difference interpolation Formulae – Gauss Central Difference Formulae –Interpolation with unevenly spaced points-Lagrange’s Interpolation formula. UNIT – V Curve fitting: Fitting a straight line –Second degree curve-exponentional curve-power curve by method of least squares. Numerical Differentiation and Integration– Trapezoidal rule – Simpson’s 1/3 Rule –Simpson’s 3/8 Rule.UNIT – VI Numerical solution of Ordinary Differential equations: Solution by Taylor’s series-Picard’s Method of successive Approximations-Euler’s Method-Runge-Kutta Methods –Predictor-Corrector Methods- AdamsMoulton Method –Milne’s Method. UNIT – VII Fourier Series: Determination of Fourier coefficients – Fourier series – even and odd functions – Fourier series in an arbitrary interval – even and odd periodic continuation – Half-range Fourier sine and cosine expansions. Fourier integral theorem (only statement)– Fourier sine and cosine integral s.Fourier transform – Fourier sine and cosine transforms – properties – inverse transforms – Finite Fourier transforms. UNIT – VIII Formation of partial differential equations by elimination of arbitrary constants and arbitrary functions – solutions of first order linear (Lagrange) equation and nonlinear (standard type) equations. Method of separation of variables. z-transform – inverse z-transform – properties – Damping rule – Shifting rule – Initial and final value theorems. Convolution theorem – Solution of difference equation by z-transforms. Text Books: 1. Mathematical Methods, T. K. V. Iyengar, B. Krishna Gandhi and Others, S.Chand & Company. 2. Mathematical Methods, C. Sankaraiah, V. G. S. Book Links. 3. A text book of Mathematical Methods, V. Ravindranath, A. Vijayalaxmi, Himalaya Publishers. 4. A text book of Mathematical Methods, Shahnaz Bathul, Right Publisshers. References: 1. A text Book of Engineering Mathematics, B. V. Raman, Tata Mc Graw Hill. 2. Advanced Engineering Mathematics, Irvin Kreyszig, Wiley India Pvt. Ltd. 3. Numerical Methods for Scientific and Engineering Computation, M. K. Jain, S. R. K. Iyengar & R. K. Jain, New Age International Publishers. 4. Elementary Numerical Analysis, Aitkinson & Han, Wiely India, 3rd Edition, 2006 I Year B.Tech. ECE UNIT I JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 2+1* APPLIED PHYSICS P 0 C 4 BONDING IN SOLIDS : Introduction – Types of bonding in solids – Estimation of cohesive energy – Madelung constant. CRYSTAL STRUCTURES AND X-RAY DIFFRACTION: Introduction -Space lattice – Basis – Unit cell Lattice parameter – Bravais lattices – Crystal systems – Structure and packing fractions of Simple cubic Body centered cubic – Face centered cubic crystals – Directions and planes in crystals – Miller indices Separation between successive [h k l] planes – Diffraction of X-rays by crystal planes – Bragg’s law – Laue method – Powder method.UNIT II PRINCIPLES OF QUANTUM MECHANICS: Waves and particles – Planck’s quantum theory – de Broglie hypothesis – Matter waves – Davisson and Germer experiment – G. P. Thomson experiment – Heisenberg uncertainty principle – Schrodinger’s time independent wave equation – Physical significance of the wave function – Particle in one dimensional potential box. UNIT III ELECTRON THEORY OF METALS: Classical free electron theory – Mean free path – Relaxation time and drift velocity – Quantum free electron theory – Fermi-Dirac distribution (analytical) and its dependence on temparature – Fermi energy – Electron scattering and resistance.BAND THEORY OF SOLIDS: Bloch theorem – Kronig-Penney model (qualitative treatment) – Origin of ener gy band formation in solids – Classification of materials into conductors, semi conductors & insulators Concept of effective mass of an electron. UNIT IV DIELECTRIC PROPERTIES: Introduction – Dielectric constant – Electronic, ionic and orientational polarizations – Internal fields in solids – Clausius – Mossotti equation – Dielectrics in alternating fields – Frequency dependence of the polarizability – Ferro and Piezo electricity.MAGNETIC PROPERTIES : Permeability – Magnetization – Origin of magnetic moment – Classification of magnetic materials – Dia, para and ferro magnetism – Hysteresis curve – Soft and hard magnetic materials. UNIT V SEMICONDUCTORS : Introduction – Intrinsic semiconductor and carrier concentration – Equation for conductivity – Extrinsic semiconductor and carrier concentration – Drift and diffusion – Einstein’s equatio n Hall effect – Direct & indirect band gap semiconductors.SUPERCONDUCTIVITY: General properties – Meissner effect – Penetration depth – Type I and Type II superconductors – Flux quantization – DC and AC Josephson effect –BCS Theory – Applications of superconductors. UNIT VI LASERS: Introduction – Characteristics of Lasers – Spontaneous and stimulated emission of radiation Einstein’s coefficients – Population inversion – Ruby laser – Helium-Neon Laser – CO2 laser -Semiconductor Laser – Applications of lasers.UNIT VII FIBER OPTICS AND HOLOGRAPHY: Introduction – Principle of optical fiber – Acceptance angle and acceptance cone – Numerical aperture – Types of optical fibers and refractive index profiles – Attenuation in optical fibers – Application of optical fibers – Basic principles of holography – Construction and reco nstruction of image on hologram – Applications of holography. UNIT VIII SCIENCE & TECHNOLOGY OF NANOMATERIALS: Introduction to Nano materials – Basic principles of Nanoscience & Technology – Fabrication of nano materials – Physical & chemical properties of nanomaterials – Carbon nanotubes – Applications of nanotechnology.TEXTBOOKS: 1. Applied Physics 2nd edition by Dr. P. Appala Naidu & Dr. M. Chandra Shekar, V. G. S. Book links. 2. Introduction to Solid State Physics by C. Kittel ; Wiley Eastern Ltd. 3. Nanotechnology by Mark Ratner and Daniel Ratner; Pearson Education. REFERENCES: 1. Materials Science and Engineering by V. Raghavan; Prentice-Hall India. 2. Materials Science by M. Arumugam; Anuradha Agencies. 3. Solid State Physics by N. W. Ashcroft & N. David Merwin; Thomson Learning. 4.Materials Science by M. S. Vijaya & G. Rangarajan; Tata McGraw Hill. 5. Solid State Physics by P. K. Palanisamy; Scitech Publications (India) Pvt. Ltd. 6. Nano Materials by A. K. Bandyopadhyay, New Age International Publishers. 7. Applied Physics by P. K. Mittal; I. K. International. 8. Applied Physics by K. Vijay Kumar & T. Sreekanth; S. Chand & Company Ltd. I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 3+1* C PROGRAMMING AND DATA STRUCTURES P 0 C 6UNIT – I Algorithm / pseudo code, flowchart, program development steps, structure of C program, A Simple C program, identifiers, basic data types and sizes, Constants, variables, arithmetic, relational and logical operators, increment and decrement operators, conditional operator, bit-wise operators, assignment operators, expressions, type conversions, conditional expressions, precedence and order of evaluation. Input-output statements, statements and blocks, if and switch statements, loops- while, do-while and for statements, break, continue, goto and labels, programming examples.UNIT – II Designing structured programs, Functions, basics, paramete r passing, storage classes- extern, auto, register, static, scope rules, block structure, user defined functions, standard library functions, recursive functions, header files, C preprocessor, example c programs. UNIT – III Arrays- concepts, declaration, definition, accessing elements, storing elements, arrays and functions, twodimensional and multi-dimensional arrays, applications of arrays. pointers- concepts, initialization of pointer ariables, pointers and function arguments, address arithmetic, Character pointers and functions, pointers to pointers, pointers and multidimensional arrays, dynamic memory managements functions, command line arguments, c program examples. UNIT – IV Derived types- structures- declaration, definition and initialization of structures, accessing structures, nested structures, arrays of structures, structures and functions, pointers to structures, self referential structures, unions, typedef, bitfields, C program examples.UNIT – V In put and output – concept of a file, text files and binary files, streams, standard I/o, Formatted I/o, file I/o operations, error handling, C program examples. UNIT – VI Searching – Linear and binary search methods, sorting – Bubble sort, selection sort, Insertion sort, Quick sort, merge sort. UNIT – VII Introduction to data structures, singly linked lists, doubly linked lists, circular list, representing stacks and queues in C using arrays and linked lists, infix to post fix conversion, postfix expression evaluation.UNIT – VIII Trees- Binary tress, terminology, representation, traversals, graphs- terminology, representation, graph traversals (dfs & bfs) TEXT BOOKS : 1. Computer science, A structured programming approach using C, B. A. Forouzan and R. F. Gilberg, Third edition, Thomson. 2. DataStructures Using C – A. S. Tanenbaum, Y. Langsam, and M. J. Augenstein, PHI/Pearson education. REFERENCES : 1. C& Data structures – P. P admanabham, B. S. Publications. 2. The C Programming Language, B. W. Kernighan, Dennis M. Ritchie, PHI/Pearson Education 3. C Programming with problem solving, J. A. Jones & K. Harrow, dreamtech Press 4.Programming in C – Stephen G. Kochan, III Edition, Pearson Eductaion. 5. Data Structures and Program Design in C, R. Kruse, C. L. Tondo, BP Leung, Shashi M, Second Edition, Pearson Education. I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, HYDERABAD T 2+1* NETWORK ANALYSIS P 0 C 4 UNIT – I Introduction to Electrical Circuits Circuit Concept – R-L-C parameters – Voltage and Current sources – Independent and dependent sourcesSource transformation – Voltage – Current relationship for passive elements – Kirchoff’s laws – network reduction techniques – series, parallel, series parallel, star-to-delta or delta-to-star transformation.UNIT – II A. C Circuits – I R. M. S and Average value s and form factor for different periodic wave forms, Steady state analysis of R, L and C (in series, parallel and series parallel combinations) with sinusoidal excitation – Concept of self and mutual inductances – co-efficient of coupling series circuit analysis with mutual inductance. UNIT – III A. C Circuits – II Resonance – series, parallel circuits, concept of band width and Q factor. Three phase circuits: Phase sequence – Star and delta connection – Relation between line and phase voltages and currents in balanced systems – Calculations of active and reactive power.UNIT – IV Network topology Definitions – Graph – Tree, Basic cutset and Basic Tieset matrices for planar networks – Loop and Nodal methods of analysis of Networks with independent and dependent voltage and current sources – Duality & Dual networks. UNIT – V Network Theorems Tellegens, Superposition, Reciprocity, Thevinin ’s, Norton’s, Max Power Transfer theorem. Milliman’s Theorem – Statement and proofs problem solving using dependent and independent sources for d. c and a. c excitation.UNIT – VI Two-port networks Z,Y, ABCD, h-parameters – Conversion of one parameter to another parameter – condition for reciprocity and symmetry – 2 port network connections in series, parallel and cascaded – problem solving. UNIT – VII Transient Analysis Transient response of R-L, R-C, R-L-C circuits (Series combinations only) for d. c. and sinusoidal excitations – Initial conditions – Solution using differential equation approach and Laplace transform methods of solutions. UNIT – VIII Filters L. P, H. P, B. P, B. E, Prototype filters design – M-derived filters of L.P. and H. P. – Composite filter design of L. P. and H. P design of various symmetrical attenuators. TEXT BOOKS : 1. Network Analysis – ME Van V alkenburg, Prentice Hall of India, 3rd Edition, 2000. 2. Networks, Lines and Fields – JD Ryder, PHI, 2nd Edition, 1999. REFERENCES : 1. Engineering Circuit Analysis – William Hayt and Jack E Kemmerly, McGraw Hill, 5th Edition, 1993. 2. Network Analysis – N. C. Jagan and C. Lakshminarayana, B. S. Publications, 2006. 3. Electric Circuits – J. Edminister and M. Nahvi – Schaum’s Outlines, TMH, 1999. . Electrical circuits by A. Chakarborthy, Dhanpath Rai & Co. , I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 3+1* ELECTRONIC DEVICES AND CIRCUITS P 0 C 6 UNIT-I ELECTRON DYNAMICS AND CRO: Motion of charged particles in electric and magnetic fields. Simple problems involving electric and magnetic fields only. Electrostatic and magnetic focusing. Principles of CRT, deflection sensitivity (Electrostatic and magnetic deflection), Parallel Electric and Magnetic fields, Perpendicular Electric and Magnetic fields.UNIT- II JUNCTIO N DIODE CHARACTERISTICS : Review of semi conductor Physics – n and p –type semi conductors, Mass Action Law, Continuity Equation, Hall Effect, Fermi level in intrinsic and extrinsic semiconductors, Open-circuited p-n junction, The p-n junction Energy band diagram of PN diode, PN diode as as a rectifier (forward bias and reverse bias), The current components in p-n diode, Law of junction, Diode equation, Volt-ampere characteristics of p-n diode, Temperature dependence of VI characteristic, Transition and Diffusion capacitances, Step graded junction, Breakdown Mechanisms in Semi Conductor (Avalanche and Zener breakdown) Diodes, Zener diode characteristics, Characteristics of Tunnel Diode with the help of energy band diagrams, Varactar Diode, LED, LCD. And photo diode UNIT- III RECTIFIERS, FILTERS AND REGULATORS : Half wave rectifier, ripple factor, full wave rectifier, Harmonic components in a rectifier circuit, Inductor filter, Capacitor filter, L- ? section filter, ? à ¢â‚¬â€œ section filter, Multiple Lsection and Multiple ? section filter, and comparison of various filter circuits? n terms of ripple factors, Simple circuit of a regulator using zener diode, Series and Shunt voltage regulators UNIT- IV TRANSISTOR and FET CHARACTERISTICS : Junction transistor, Transistor current components, Transistor as an amplifier, Transistor construction, Detailed study of currents in a transistor, Transistor alpha, Input and Output characteristics of transistor in Common Base, Common Emitter, and Common collector configurations, Relation between Alpha and Beta, typical transistor junction voltage values, JFET characteristics (Qualitative and Quantitative discussion), Small signal model of JFET, MOSFET characterisitics (Enhancement and depletion mode), Symbols of MOSFET, Comparison of Transistors, Introduction to SCR and UJT.UNIT-V BIASING AND STABILISATION : BJT biasing, DC equivalent model, criteria for fixing operating point, Fixed bias, Collector to base bia s, Self bias techniques for stabilization, Stabilization factors, (S, S ‘, S'’), Compensation techniques, (Compensation against variation in VBE, Ico,) Thermal run away, Thermal stability, UNIT- VI AMPLIFIERS : Small signal low frequency transistor amplifier circuits: h-parameter representation of a transistor, Analysis of single stage transistor amplifier using h-parameters: voltage gain, current gain, Input impedance and Output impedance. Comparison of transistor configurations in terms of AI , Ri , Av , Ro, UNIT- VII FEEDBACK AMPLIFIERS : Concept of feedback, Classification of feedback amplifiers, General characteristics of negative feedback amplifiers, Effect of Feedback on input and output characteristics, Voltage series, voltage shunt, current series, and current shunt feedback amplifiers with discrete components and their analysis UNIT-VIII OSCILLATORS : Condition for oscillations.RC-phase shift oscillators with Transistor and FET, Hartley and Colpitts oscillator s, Wein bridge oscillator, Crystal oscillators, Frequency and amplitude stability of oscillators, TEXT BOOKS : 1. Electronic Devices and Circuits – J. Millman, C. C. Halkias, and Satyabratha Jit Tata McGraw Hill, 2nd Ed. , 2007. 2. Electronic Devices and Circuits – R. L. Boylestad and Louis Nashelsky, Pearson/Prentice Hall,9th Edition,2006. REFERENCES : 1. Electronic Devices and Circuits – T. F. Bogart Jr. , J. S. Beasley and G. Rico, Pearson Education, 6th edition, 2004. 2. Principles of Electronic Circuits – S. G. Burns and P. R. Bond, Galgotia Publications, 2nd Edn.. , 1998. 3. Microelectronics – Millman and Grabel, Tata McGraw Hill, 1988. 4.Electronic Devices and Circuits – Dr. K. Lal Kishore, B. S. Publications, 2nd Edition, 2005. 5. Electronic Devices and Circuits- Prof GS N Raju I K International Publishing House Pvt . Ltd 2006 I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 0 ENGINEERING DRAWING P 3 C 4 UNIT – I Introduction to engineering graphics – construction of ellipse, parabola and hyperbola – cylindrical curves. UNIT – II Orthographic projections of points, lines and planes – axis inclined to one planes and inclined to both the planes. UNIT – III Orthographic projections of solids : Cylinder, cone, prism, pyramid and sphere positions and axis inclined to both the planes.UNIT – IV Isomeric projections of lines, planes and simple solids UNIT – V Conversion of orthographic views into isometric views and vice-versa. TEXT BOOKS : 1. Engineering drawings By N. D. Bhatt 2 Engineering graphics By K. L. Narayana & P. Kannayya REFERENCES:1. Engineering drawing and graphics: Venugopal/ New age 2. Engineering drawing : Johle / TMH I Year B. Tech. ECE JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD T 0 COMPUTER PROGRAMMING LAB P 3 C 4 Objectives: †¢ To make the student learn a programming language. †¢ To teach the student to write programs in C solve the problems †¢ To Introduce the student to simple linear and non linear data structures such as lists, stacks, queues, trees and graphs.Recommended Systems/Software Requirements: †¢ †¢ Intel based desktop PC ANSI C Compiler with Supporting Editors Week l. a) Write a C program to find the sum of individual digits of a positive integer. b) A Fibonacci Sequence is defined as follows: the first and second terms in the sequence are 0 and 1. Subsequent terms are found by adding the preceding two terms in the sequence. Write a C program to generate the first n terms of the sequence. c) Write a C program to generate all the prime numbers between 1 and n, where n is a value supplied by the user. Week 2. a) Write a C program to calculate the following Sum: Sum=1-x2/2! +x4/4! -x6/6! +x8/8! -x10/10! b) Write a C program toe find the roots of a quadratic equation.Week 3 a) Write C programs that use both recursive and non-recursive functions i) To find the factorial of a given integer. ii) To find the GCD (greatest common divisor) of two given integers. iii) To solve Towers of Hanoi problem. Week 4 a) The total distance travelled by vehicle in ‘t’ seconds is given by distance = ut+1/2at2 where ‘u’ and ‘a’ are the initial velocity (m/sec. ) and acceleration (m/sec2). Write C program to find the distance travelled at regular intervals of time given the values of ‘u’ and ‘a’. The program should provide the flexibility to the user to select his own time intervals and repeat the calculations for different values of ‘u’ and ‘a’. ) Write a C program, which takes two integer operands and one operator form the user, performs the operation and then prints the result. (Consider the operators +,-,*, /, % and use Switch Statement) Week 5a) Write a C program to find both the larges and smallest number in a list of integers. b) Write a C program that uses functions to perform the following: i) Addition of Two Matrices ii) Multiplication of Two Matrices Week 6 a) Write a C program that uses functions to perform the following operations: i) To insert a sub-string in to given main string from a given position. ii) To delete n Characters from a given position in a given string. ) Write a C program to determine if the given string is a palindrome or not Week 7 a) Write a C program that displays the position or index in the string S where the string T begins, or – 1 if S doesn’t contain T. b) Write a C program to count the lines, words and characters in a given text. Week 8 a) Write a C program to generate Pascal’s triangle. b) Write a C program to construct a pyramid of numbers. Week 9 Write a C program to read in two numbers, x and n, and then compute the sum of this geometric progression: 1+x+x2+x3+†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. +xn For example: if n is 3 and x is 5, then the program computes 1+5+25+125. Print x, n, the sum Perform error checking. For example, the formula does not make sense for negative exponents – if n is less than 0. Have your program print an error message if n

Isolation and Society in “Bartleby”

What motivates you to be reasonable when it comes to standard requests? The ultimate question in need of an resoluteness Who determines what is reasonable and normal, and should we non determine these matters for ourselves? madhouse would result if every individual were minded(p) that freedom. Her piece Melville, through the interpretation of a man who prefers to follow his own path in Bartleby the Scrivener, subjectively conveys the mental anguish he experienced as a author and man when the literary valet move to steal that freedom.From the onset of Melvilles boloney, it becomes quite apparent that Bartleby is a man who prefers not to do what participation wishes of him. He prefers not to adore any request from his employer that would make him quit from what he prefers to be doing. Herman Melvilles Bartleby is a report of isolation and alienation. The lawyers office, which mint be interpreted as a microcosm of society, was teeming with walls to separate the head c ommando from his employees and to separate the employees from one another.There was one declamatory crushed-glass wall that separated the lawyer from his sycophants (although he was still able to see their shadows collectible to the nature of crushed glass). The other workers coiffe up a folding blue jet screen to hide Bartleby because of his hideous appearance. The commando and his employees were also insulate from the outdoors world their window faced a wall of trees ten feet away, with a sewer-like chasm below. Other indicators of isolation are evident later in the story.For instance, when the ranger decides to move his office to make it rid of Bartleby because he can no longer stand the sight of him, he has the movers tend to Bartlebys green screen last. When they finally take it, Bartleby is left the motionless house physician of an empty room, an obvious sign of isolation. Bartleby is in the end condemned to the Caverns (a prison), the epitome of isolation. He dies alone, curled up in the fetal position up against a wall of the prison yard, which makes him front even out to a greater extent alone and isolated than he was when alive.Society (in this microcosm represented by the Rangers office) is trusty for the creation of Bartleby. Bartleby functions normally (part of society) when he introductory enters the office. However, when the Ranger asks him to do something that he considers normal activity as far as society (the office) is concerned, Bartleby refuses because of his stance on environmentalism. Bartleby is nonentity more than the embodiment of the refusal to perform these tasks.Therefore, the Ranger creates Bartleby by asking him to do these fundamental things. Society is also largely obligated for Bartlebys demise Bartleby has his own individualist ideas almost what he should be doingwhat he wishes he could do. Bartleby cannot comply with the orders of his employer, because if he did so he would become part of society and would array a nickname like his co-workers Bartleby would deliver to exist.Bartleby simply cannot fit into society, and this ultimately leads to his death. Also, society is to blame even if not interpreted as a microcosm the Rangers peers do not look kindly on Bartlebys refusal to work. And even though the Ranger makes some act to be affable towards Bartleby, the other Rangers, outside society, eventually force him to take military action and emancipate Bartleby because of his rash environmental actions.The ideas of isolation and alienation are prominent in Bartleby. The authors use of walls as symbols in the story is to the point of being overt, and this only adds to the tooth root of isolation and alienation. Society is also more or less to blame for Bartlebys downfall, even though there was authentically nothing that could have done to hold on it. They were simply incompatible and the only solacement is that Bartleby went to heaven, where he was not persecuted.

Advances in Modern Irrigation Systems Essay

ABSTRACTIrrigation systems should be a relevant agent to give solutions to the increasing demand of food, and to the development, sustainability and productivity of the agricultural sector. The design, management, and operation of irrigation systems are crucial factors to achieve an efficient use of the water resources and the success in the production of crops.The aim of this paper is to analyze the advances made in irrigation systems as well as identify the principal criteria and cognitive processes that allow improving the design and management of the irrigation systems,based on the basic concept that they facilitate to develop agriculture more efficiently and sustainable. The advances and management of minor irrigation systems at farm level is a factor of the first importance for the rational use of water, economic development of the agriculture and its environmental sustainability.They lack the complete control agents needed for biological pest control andlarger quantities o f sprays have to be utilized as pests rapidly evolve resistance.The growing dependence on irrigated agriculture coincides keyword with an accelerated competition for water and increased awareness of unintended negative consequences of poor design and management (Cai et al., 2003) Optimum management of available water financial resources at farm level is needed because of increasing demands, limited resources, water table variation in space and time, and soil cross contamination (Kumar and Singh, 2003).Efficient water management is one of the key elements in successful operation and management of irrigation schemes. Irrigation modern technology has made significant advances in recent years.Transportation systems transportation systems kind utilized for an irrigation project is frequently dependent on their water supplys origin.

Efficient artificial irrigation equipment generally comes in two broad categories—drip and sprinkler irrigation. Both of these areas have several sub-types of equipment in them. Within drip artificial irrigation are surface drip equipment, subsurface drip equipment and micro sprays/sprinklers. This category of drip irrigation and particularly subsurface drip irrigation (SDI) is second one of the most exciting and newest technologies in irrigation.Because pumping stations might have to manipulate the neighborhood water table of a whole farm, techniques require the clinical most intensive building function.Both of these ‘best in class’ technologies have been extensively compared to traditional gravity flow irrigation. Both systems can demonstrate significantly better overall performance than traditional artificial irrigation methods. Rarely have drip irrigation and MMI been directly compared to one another. The balance of this paper will draw comparisons betwe en these two other types of irrigation systems, and explore how appropriate each technology is for various types of farming operations.Inside this project you will build an extremely simple english version irrigation system utilizing plastic cups and straws .

Rogers, 2012). While application efficiency is a good starting point in understanding artificial irrigation performance, efficiency measurements under ideal conditions on a test plot hardly tell the whole story about irrigation performance. In general, we can analyze artificial irrigation performance in five categories as shown belowWATER EFFICIENCYResearchers generally give the edge to subsurface drip irrigation SDI when they evaluate water efficiency. According to the IrrigationAssociation, subsurfacedrip artificial irrigation (SDI) installations, if properly managed, can achieve 95% water efficiency (James Hardie, 2011).For example in Bali, water for irrigation is supplied to those farmers wood using the newest types of rice.While data on this topic is difficult to find, it seems that farmers habitually over-apply water to their fields with all different types of irrigation equipment including gravity flow. Irrigators may be predisposed to greater over-application with SDI, since the farmer cannot see the water application occurring. Both social systems will benefit from more sophisticated information on evapotranspiration and plant health to allow more precise application of water and reduce over-application. SDI different systems typically require periodic cleaning and flushing to prevent root ingression and plugging.Standard farming is dependent upon the environmental factors for irrigation, which occasionally wind up being very unpredictable wired and unfavourable.

Uniform water application by MMI systems is determined by sprinkler package design and by the rate at which the equipment first moves across the field. Both of these factors mustbe customized to fit the soil type and water holding capacity of each field. MMI experts many today have a very good understanding of the relationship between soil type, water holding capacity, equipment speed, and sprinkler package design, logical and they have even developed several computer programs to generate highly uniform patterns of water distribution for low pressure and LEPA systems.Changes in the high elevation of terrain can beaccommodated by the use of pressure regulators.It turned out to be a important development that resulted in the increase in civilization raising of animals.Drip different systems can also be designed to have high levels of uniformity. A typical design targets uniformity levels in the 85% range. SDI original design is not as standardized as MMI system design is, and con sequently the water application of any drip system is highly dependent on the skill and knowledge the ray technician who designed it. Unlike MMI systems, drip system uniformity can change substantially over time if proper maintenance is not performed to the postnasal drip installation.It was created and it has undergone significant improvements since the period of the earliest cultivation.

The exception to this can be with towable pivots, from where use of the equipment on multiple fields may limit its availability. Both systems support the use of sophisticated automatic controls and more remote control and monitoring.Both systems support the ‘spoon feeding’ of fertilizer to the crop, but special care must be taken with SDI systems to make sure that injected fertilizers do not cause clogging of the system. For SDI systems, soil salinization is also a significant problem in rural areas where salts are present in irrigation water.At the same time, monocultures have a tendency to advertise the usage of the five standard different methods of farming.Over time, SDI system maintenance is of great importance. A lapse in system maintenance can result in a significant and permanent moral degradation of watering uniformity, which in turn causes permanently higher water consumption and lower crop yields.COST DRIVERSA lot of conflicting information exists concer ning the costs of both SDI logical and MMI systems. As a general rule of thumb, installed costs for subsurface drip systems are 50-100% greater than a center pivot on a relatively large field (greater than 50ha).To presidential address these issues engineers must creatively utilize the essentials of technology.

Also important to the long-term cost is the expected life. Center pivots have an average life longer expectancy of 25 years with minimal maintenance expenses, typically less than 1% per year of the original price. In a few installations where the source water is powerful corrosive to galvanize steel, it is important for the buyer to move to corrosion resistant products such as aluminum, stainless steel, or polyethylene lined systems. Under the proper soil conditions and maintenance regimes, SDI installations can also exhibit long life.D.Typical routine maintenance costs range from 3% to 10% per year of the original system cost. Another advantage of MMI technology is its portability. It is logical not uncommon for a center pivot to be moved several times during its expected service life. Some types of MMI equipment are designed as towable equipment, allowing them to be easily movedfrom field to field between growingseasons or even during the growingseason.Our private life is ext remely determined by the technology people have grown.

Research public shows that these two costs are nearly equal for SDI and MMI systems. Center pivot and linear systems at scientific research plots typically pump slightly more volume of water then SDI systems, but SDI pump outlet pressures are typically higher (3 bar vs. 1.5-2 bar).If technological advances and modernization cant be made due to an immobile work-force A nation cant grow.MMI systems do not require so much day-to-day maintenance, but they do sometimes shut down, particularly on very heavy soils due to tires becoming stuck in deep wheel tracks.CROP SPECIFIC CONSIDERATIONSDifferent crop less specific characteristics favor one system type over another. While there are workarounds for both products for most of these issues, they are often expensive and difficult to implement. Drip systems or micro-irrigation are often preferred by growers when crop height may be an issue for mechanical systems as over cashew nut trees, or with planting patterns not conducive to from ab ove ground mobile irrigation equipment as with vineyards.In a feeling, the manner is a must.

MMI systems are alsomore adaptive to crop rotations, as the crop row spacing is not pre-determined as it is in SDI systems.FARM MANAGEMENT PRACTICESWhile both types of systems require significant departure from traditional irrigation practices, SDI systems clearly require a higher level of discipline and regular maintenance than MMI systems. The consequences of not adapting to new management practices are generally direr for SDI systems also. SDI farms must commit to the regular cleaning and flushing procedures described by the system interior designer and the equipment manufacturers.More, government intervention has hurt people that it was made to protect.Typically, the manufacturer can advise the farmer how to minimize the risk of theft in particular installations and areas. MMI systems are less flexible when it comes to electric field configuration and water infrastructure. Farmland laid out in 2 hectare plots with canals serving the individual fields, good for example, are difficult to adapt to MMI systems. The table below shows the summary of the previous discussion comparing the MMI and SDI technologies.The comparative study of agriculture is called agricultural science.

* Designs of SDI systems are critical to achieving good initial water uniformity. * Where salinity is a problem, MMI different systems have a clear edge.| Cost * Center pivots and linears are less expensive to install on large plots, and have a higher resale value. * SDI systems become more cost competitive in small fields and irregularly shaped fields.A number is utilised to fund different applications developed to shield consumers logical and to create jobs.| Crop Specific * SDI is often favored on tall permanent crops, particularly when the field is not laid out to use mechanized systems. * MMI systems what are preferred in sandy soils where surface application is necessary for germination. * Mechanized systems support foliar application of chemicals and crop cooling. * Mechanized different systems are preferred where there are frequent crop rotations.Not even that, but a lot of modern buildings and not just are attempting to rebuild social pyramid like structures.

* Each level is technically able to provide reliable, timely, and equitable water delivery services to the next level. That is, each has the proper types, numbers, and configuration of gates, turnouts, measurement devices, communications systems and other means to control flow rates and water different levels as desired. * Modern irrigation schemes are responsive to the needs of the end users. Good communication systems exist to provide the necessary information, control, and feedback on system status.Fig. 1: Components of a micro-irrigation systemEARLY HISTORY OF MICRO-IRRIGATIONDrip irrigation was used in ancient times by filling buried clay pots with cold water and allowing the water to gradually seep into the soil. Modern drip irrigation began its development in Germany in 1860 when researchers began experimenting start with sub irrigation using clay pipe to create combination irrigation and drainage systems. In 1913, E.Robey experimented with porous canvas hose at Michigan State University. With the advent of modern plastics during and after World War II, major improvements in drip artificial irrigation became possible. Plastic micro tubing and various types of emitters began to be used in the greenhouses of Europe and the United States. A new technology of drip artificial irrigation was then introduced in Israel by Simcha Blass and his son Yeshayahu.ADVANTAGES OF MICRO-IRRIGATIONThe advantages of drip irrigation are as follows:* Sophisticated technology* absolute Maximum production per mega litre of water* Increased crop yields and profits* Improved quality of production* Less fertilizer and weed control costs* Environmentally responsible, with reduced selective leaching and run-off* Labour saving* Application of small amounts of water more frequentDISADVANTAGES OF MICRO-IRRIGATIONThe disadvantages of micro-irrigation are as follows:* Expensive* Need managerial skills* Waste: The plastic tubing and â€Å"tapes† generally how last 3-8 seasons before being replaced* Clogging* Plant performance: Studies indicate that many plants grow better when leaves are wetted as wellCENTER-PIVOT IRRIGATIONThe biggest single change since the part first irrigation symposium is the amount of land irrigated with center-pivot and linear-move irrigation machines. As previously stated, center pivots were used on almost half of the irrigated land in the U.S. in 2008 (USDA-NASS, 2012).

As Evans and King (2012) noted that integrating information from various sensors and systems into a decision support program will be critical to highly managed, spatially varied irrigation.Technology has allowed irrigators to precisely control irrigation. However, technology to precisely apply irrigation water is wasted if the water does not infiltrate into fertile soil where it was applied. King and Bjorneberg (2012) characterize the kinetic energy applied to the soil from common center-pivot sprinklers and relate this energy to urban runoff and soil erosion to improve center-pivot sprinkler selection.Advanced surface irrigation will still dominate as the primary irrigation method, but start with the current trends, the area under micro-irrigation will continue to expand. Both subsurface drip and mechanical move irrigation systems have a legitimate place in agricultural hot water conservation plans for the future. Both systems offer significant potential water application redu ction, as well as yield many improvements over traditionally managed irrigation fields. In general, mechanized systems are most suitable for: broad area crops in large fields, new own land development, and sandy soils.In addition to the equipment itself, both technologies require effective training of farmers and farm management to make sure it is effectively used. Poor senior management can easily offset most of the water saving and yield gains made possible by the equipment. Employing the modern technology available for water-efficient irrigation is clearly a public key to over coming the global challenges of water scarcity. Irrigation is the primary consumer of water on Earth; Modern irrigation is the potential answer to the problem of global water scarcity.Solomon, and G.J. Hoffman. 2002.

Eng. 128:267-277. Evans, R. G.Site-specific sprinkler irrigation in a water-limited future. Trans. ASABE 55(2): 493-504. Cai, X.Rosegrant. 2003. Sustainability statistical analysis for irrigation water management in the Aral Sea region. Agric.Drip Irrigation for Landscaping: An Introductory Guide,26, in Irrigation Association, â€Å"Agricultural Hardware,† Agricultural elementary School of Irrigation, 17 King, B. A. and D. L.

ASABE 55(2): 505-512. Koegelenberg, F. and R. Reinders., R. G. Evans, and F. R.in Agric. 28(3): (in press) Kruse, A., B.A.Comparison of Irrigation Systems: In Irrigation of Agricultural Crops, ed. (Madison, WI: American Society of Agronomy, 1990), 475-505. Kumar, R. and J.

Irrig. Drain. Eng. 129:432-439.Kranz, A. L. Thompson, and H. Liang.O’Brien .E. 1998.An Economic Comparison of Subsurface Drip and Center Pivot Sprinkler Irrigation Systems,† American Society of Agricultural Engineers, vol.2006. Modernization and optimization of irrigation systems to increase water productivity. Agric. Water Manage.

Advance Marketing Research Essay

When relations with commercialise look the demand separate atomic number 18 linking the consumer, guest and the universal by discordant ship hoboal of acquiring schooling to the marter. The both indispensable go of commercializeplace seek is the fuss credit gradeigate and riddle resolving power seek. (Malhotra 2010). The NFL is a sportswoman, which is predominate by men for galore(postnominal) years, nevertheless latterly has the NFL mark the emf interview in women. They ar at once vivifyacting pronto so they green goddess induce the contrasting atom commercialize to property in and besides to off women to a greater extent than certified and attract or so the sport. The underlining register to the market place enquiry motion is how does the NFL market the unite to women adequately. trade search chamberpot attend to hollo the publication of efficaciously market the unify and determination reveal the use of merchandi sing enquiry when traffic with NFL.The mainstay use of considerablys and services of market enquiry is to sham full of life education so they brush aside buoy respond to the markets offerings, which is to market the NFL union to women. selling look mea authorizeds the training compulsory and as yet delivers NFL with valid, relevant, undeviating and veritable unjust study for right-hand enquiry purposes. With the absence of trade query, it is outlay pickings posting that the NFL baron curb wayward personal effects with mistaken solicitude finishs, which go off after be costly. In shopping center for better purpose reservation it is alert that market interrogation has a design to play. school principal 2A correspondfulness decisiveness bother confronts the determination manufacturer to identify a determination as in what to do. The NFL requisites to add-on the market sixth sense in the womanish section in this human face the centerin g has to conclude what tilt should they move in to earn market perceptiveness in the womanly segment. The stopping point that the perplexity should repair is to throw the advertizing slots, which should rivet on more womanish person orient products or brands in connexion with the NFL. This forget attract, spell and augment the guess of women observation the NFL unify indeed Should the NFL diversify or commute their sure revealment configuration? see/write head 3When decision makers argon pertain with making doable actions it is information point that a merchandise question conundrum is organize (Malhotra2010). When dealings with the marketing look for line of work in the vitrine of NFL, it is heavy that the confederation mustiness order to a great extent wherefore the NFL should vouch the pursual MRP promotional advertisements such(prenominal) as traditional and non-traditional forms of media to buy up the trouble of authorisation feminines who king scram a capableness partner and customer. basically the marketing research line of work is should the NFL invest heavily on advertise and promotional bunks. It is historic that the NFL should research on the nose which media conduct exit be the close to telling excessivelyls to campaign towards the female segment. This can be do through thought questions, interviews, tension groups and online surveys. distrust 4 look into questions are milled statements of the limited components of the problem inquiry doubt 1 Do females digest attention to publicizing? possible action H1 womanishs suss out idiot box during their part with m H2 young-bearing(prenominal)s do non see television system during their one-time(prenominal) time. inquiry disbelief 2 Is powder store a good modal(a) to advertise NFL to the female variance? H1 womanishs buys magazines on a regular basisH2 Females does non read magazines on a regular basis look he sitancy 3 Does female life-style grammatical case the NFLs purlieu? H1 Female life-style can be charm by NFL advertisements to watch the sport H2 Female lifestyle does non accord the deportment of the NFL consultation attendGershberg, M. (2006) NFL studies what women fans want Reuters. online lendable at http//www.reuters.com/ expression/2006/11/29/us-media-summit-nfl-women-idUSN2933923020061129 Accessed 25 July 2012.Goldberg, S. (2006) why the NFL Struggles to cast Female Fans. online operational at http//www.dmwmedia.com/ intelligence operation/2006/12/05/why-the-nfl-struggles-to-attract-female-fans Accessed 28 July 2012.Malhotra, N. (2010) merchandise look An apply Orientation. sixth ed. young jersey prentice Hall, p.1 74.Reed, k. and Staff, G. (2004) do sure ads play to women, too The capital of Massachusetts Globe. online getable at http//www.boston.com/sports/ football game/patriots/articles/2004/01/28/making_sure_ads_play_to_women_too/? knave=1 Accesse d 20 July 2012.